ST-3/ALW Adapter | XT Series Accessory
The ST-3/ALW adapter for the SensorLink® Amp Litewire probe enable testing of overhead installation with the ST-3/XT3
Using the ST-3/ALW adapter with the SensorLink® Amp Litewire makes it possible to perform a Primary/Secondary Test using the ST-3/XT3 with overhead installations. The accessory is electronically compensated and automatically detected when plugged in. The Primary/Secondary Test is automatically adjusted by the Probewell Connect 2.0 application to reflect the functionality.
- Electronically compensated
- Automatically detected by the ST-3/XT3
SKU: 9030-3415
Using the ST-3/ALW adapter with the SensorLink® Amp Litewire makes it possible to perform a Primary/Secondary Test using the ST-3/XT3 with overhead installations. The accessory is electronically compensated and automatically detected when plugged in. The Primary/Secondary Test is automatically adjusted by the Probewell Connect 2.0 application to reflect the functionality.
- Electronically compensated
- Automatically detected by the ST-3/XT3
SKU: 9030-3415
ST-3/ALW Adapter | Installation
The ST-3/ALW adapter lets you connect the SensorLink® Amp Litewire accessory to the Probewell ST-3/XT3 site tester when testing overhead installations. (This accessory only lets you test one phase at a time.)
The ST-3/XT3 Transformer-Rated Site Tester verifies the three phases simultaneously when used with the ST-3/FLEX-CT2500 accessory.
How to run the test using the Probewell Connect 2.0 app
While testing a transformer, the Probewell Connect 2.0 app will prompt the user to manually switch the amp probe to the next phase until the 3 phases of the CT meter have been tested. (A followed by B then C).
- Connect the SensorLink® Amp Litewire BNC cable to the BNC jack on the ALW adapter
- Connect the 12-pin connector of the ALW at the other end to the ST-3/XT3‘s CT front port
- When powered on, the unit will automatically detect the ST-3/ALW adapter. The Probewell Connect 2.0 app can now proceed with the test (refer to the Probewell Connect 2.0 User Guide for details).
The ST-3/ALW adapter lets you connect the SensorLink® Amp Litewire accessory to the Probewell ST-3/XT3 site tester when testing overhead installations. (This accessory only lets you test one phase at a time.)
The ST-3/XT3 Transformer-Rated Site Tester verifies the three phases simultaneously when used with the ST-3/FLEX-CT2500 accessory.
How to run the test using the Probewell Connect 2.0 app
While testing a transformer, the Probewell Connect 2.0 app will prompt the user to manually switch the amp probe to the next phase until the 3 phases of the CT meter have been tested. (A followed by B then C).
- Connect the SensorLink® Amp Litewire BNC cable to the BNC jack on the ALW adapter
- Connect the 12-pin connector of the ALW at the other end to the ST-3/XT3‘s CT front port
- When powered on, the unit will automatically detect the ST-3/ALW adapter. The Probewell Connect 2.0 app can now proceed with the test (refer to the Probewell Connect 2.0 User Guide for details).
Probewell Support Portal
Solutions by Products.
Help yourself to our product documentation to rapidly find answers to your questions and troubleshoot your product.
Learning Center
echnical Support
Trade-in & Trade-Up
If you own an older-generation Probewell product, you are automatically eligible for our trade-in program.
Trade in your old meter tester and get up to 1,000 USD* off the purchase of any of our newer models.
*US customers only. If you are a customer from outside the United States, please contact Probewell.
Trade-in and Trade-Up
If you own an older-generation Probewell product, you are automatically eligible for our trade-in program.
Trade in your old meter tester and get up to 1,000 USD* off the purchase of any of our newer models.
*US customers only. If you are a customer from outside the United States, please contact Probewell.
